A compact ground system checker, designed to check a total workstation ground Protects against operator hazard and product damage Easy to use - encourages frequent testing No production time loss for testing Helps provide higher yields, less rework, fewer field returns Designed for table top use; can also be wall mounted or used as a portable tester Automatic low battery check Low cost Use item 62662 to verify the calibration of this unit Made in America“Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered.” (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)
“A log should be maintained which verifies that personnel have tested their personal grounding devices.” (ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance)
“Frequency of Functional Testing: The wrist strap system should be tested daily to ensure proper electrical value. Nominally, the upper resistance reading should be < or = 10 megohms or a user-defined value.” (ANSI/ESD S1.1-2006 Annex A3)